merchmix

Publish Date :

Small Fabric Changes, Big Margin Hits

Small fabric changes affect margin through consumption as well as the supplier’s metre price. Forge keeps the material and BOM revision visible, while Core lets planners compare the resulting unit cost and total commitment before the range proceeds on an outdated margin assumption.

A young product developer measuring pale blue cotton fabric beside a midi-skirt sample.
Editorial image: a young product developer measuring pale blue cotton fabric beside a midi-skirt sample.

THE MERCHMIX DECISION / Forge + Core

The price per metre has not changed

A fabric change can raise garment cost even when the price per metre stays the same, because usable width and consumption determine how much material each unit needs.

Independent retail planning example. Financial amounts are US dollars. Forecasts, quantities and proposals are assumptions for this decision, not customer results.

merchmix.Forge + Core / Pale blue midi skirt / width and consumption
Costed baselineCurrent assumptions

Pale blue midi skirt / width and consumption

Costed baselineDecision comparison
Shell consumption2 metres
Component total$20
Landed assumption$30
Material width
Consumption basis
Costed garment
The price per metre has not changed
Cost elementQuantity / basisAmount
Shell2 m at $8$16
Lining0.6 m at $4$2.40
TrimsPer garment$1.60
Conversion and other landed costsHeld assumption$10
The original material and consumption are one revision

The cost elements are independent assumptions, not supplier quotations.

The price per metre has not changed

A midi skirt uses two metres of shell fabric at $8 per metre.

THE KEY IDEA

Keep the consumption, revision and complete cost basis together so a small material change reaches the plan with its real commercial consequence.

A stable metre price can hide a different garment cost

Material comparisons often begin with the quoted price per metre. That number is incomplete when usable width, pattern placement or the required cut changes consumption. A fabric with the same unit price can require more length for each finished garment.

This article isolates that yield question in an independent midi-skirt example. It is not another supplier-price increase. Forge supports component quantities and revision control; the technical team must provide the supported consumption rather than assume that an unchanged metre price preserves the original garment economics.

Product evidence and planning referencesMerchmix Forge: product capabilities and workflow context Merchmix Core: product capabilities and workflow context

Cost the original revision on a complete stated basis

The baseline skirt uses two metres of shell at $8 per metre, costing $16. Lining is 0.6 metres at $4, or $2.40, and trims add $1.60. Component cost totals $20. An additional $10 assumption covers conversion and the other selected landed elements, giving $30 per garment.

Name the included elements so the same expense is not counted twice. The $10 is held constant for this particular comparison, not a standard manufacturing charge. Forge’s BOM provides the component context; Core needs the selected complete planning cost rather than a material subtotal labelled as landed cost.

Record the consumption change rather than replacing the price

Assume a narrower usable shell width increases consumption to 2.25 metres while the metre price stays at $8. Shell cost becomes $18, total component cost $22 and the selected landed cost $32. The technical explanation belongs beside that revision.

A changed material reference should identify the width and consumption basis used for the costing. Forge can retain revisions and component quantities, but a saved BOM is not proof that production yield has been technically validated. The supplier and technical owner need to confirm the feasible cutting assumption.

THE FIGURES BEHIND THE DECISION

Small Fabric Changes, Big Margin Hits: Baseline components: (2 × $8) + (0.6 × $4) + $1.60 = $20. At 2.25 metres, components are $22. Adding the same $10 gives $30 and $32 landed assumptions.
Consumption caseLanded / garmentBuy cost
2.00 metres$30.00$36,000
2.25 metres$32.00$38,400
2.10 metres$30.80$36,960

Baseline components: (2 × $8) + (0.6 × $4) + $1.60 = $20. At 2.25 metres, components are $22. Adding the same $10 gives $30 and $32 landed assumptions.

Show the effect across the intended buy

For 1,200 planned skirts, the $30 baseline gives $36,000 of goods commitment. The $32 case gives $38,400, a $2,400 increase. At a constant $80 selling price, product gross margin moves from 62.5% to 60%, a difference of 2.5 percentage points.

The example excludes other operating costs and assumes all units eventually sell at that price when expressing the unit margin. Core should compare the changed cost with the buy and MFP/WSSI assumptions. It must not silently treat the higher component cost as a confirmed supplier order or an automatic retail-price change.

THE PLANNING REFERENCERead the fashion PLM guide

Use a technical sensitivity to frame the next question

If the technical team could support 2.10 metres instead, shell cost would be $16.80, component cost $20.80 and landed cost $30.80. The 1,200-unit buy would cost $36,960 and unit gross margin at $80 would be 61.5%.

That alternative is a sensitivity, not a promised saving or an instruction to cut material allowances. Compare it with construction, quality and achievable yield before adopting it. Forge retains the evidence for the material decision; Core keeps the commercial consequences of each supported case comparable.

Carry the selected revision into the plan deliberately

Once the appropriate owners agree the material and consumption, reconcile the accepted cost in the merchandise plan. Retain the previous assumption so the buyer can explain why the commitment moved. Check which styles or colourways actually use the affected component before applying the change more widely.

The hand-off depends on the configured workflow and supported product data. A design approval does not automatically establish every buying field or confirm an order amendment. Treat the accepted technical revision and the accepted planning cost as linked records that still need a deliberate reconciliation.

SignalMerchmix workspaceDecision to review
Costed baselineForge / evidenceA midi skirt uses two metres of shell fabric at $8 per metre.
Yield revisionCore / comparisonAt 2.25 metres per garment, shell cost rises to $18 although the metre price stays $8.
Technical sensitivityForge / decision reviewA lower consumption is a sensitivity until the technical team and supplier support it.

Revisit the cost when bulk evidence becomes available

Later production evidence may confirm or challenge the assumed consumption. Compare it with the retained basis and investigate whether the difference comes from yield, material price, wastage or another cost element. Avoid adjusting an unexplained total while losing the reason for it.

Forge and Core help the team connect a small development change to a specific merchandise decision. The useful outcome is a supported garment cost and a visible commitment, with the original margin assumption corrected before it becomes a buying expectation the product cannot meet.

BEFORE THE NEXT DECISION

  • Planning owner

    The technical team must confirm consumption; Forge does not infer a usable yield from the metre price alone.

  • Commercial owner

    The margin difference is 2.5 percentage points, not a 2.5% price increase.

  • Decision owner

    A lower consumption is a sensitivity until the technical team and supplier support it.

Common questions

Can cost rise when the fabric price per metre is unchanged?

Yes. The example uses more metres per garment because usable width changes, while the $8 metre price stays fixed.

Why does the landed assumption rise from $30 to $32?

Shell cost rises by $2. Lining, trims and the separate $10 conversion/landed assumption stay unchanged.

What does the change mean for 1,200 garments?

The proposed buy cost rises from $36,000 to $38,400, a $2,400 difference.

Does Forge calculate the correct production yield automatically?

No such guarantee is made. Technical and supplier evidence must support the consumption entered in the costing.

Is the 2.10-metre alternative approved?

No. It is a sensitivity showing the cost consequence if that consumption can be technically supported.

forge

A midi skirt uses two metres of shell fabric at $8 per metre.

Explore
core

At 2.25 metres per garment, shell cost rises to $18 although the metre price stays $8.

Explore

Continue reading: How product specifications and costing stay connected

Read the retail planning glossary

FROM THE ARTICLE TO YOUR OWN RETAIL PLAN

Review the decision.
See the workflow.

Bring your planning questions to a demo, or explore a proof of concept on your own data.

Book a demo Explore the proof of concept